Using your answering machine10
8950 Response 75+ UG [2] – 29/09/2008
8950 Response 75+ UG [2] – 29/09/2008
During message playback the message indicator
shows the number of the message being played.
ashes if the message is number 10 or more.
Listening to your messages and memos
When new messages (or memos) are received you will hear a message alert beep
(which can be switched off, see next page) and the message display will show the
number of messages that are recorded in the memory. If there are more than 9,
the display will ash
.
1. Press
. The number of messages will be announced and then played back
in the order they were received.
When all the messages have been played, you will hear ‘End of messages’ and
the message counter will count down from 8 to 0. During playback, press:
to adjust the speaker volume (see next page).
to pause playback, press again to resume playback.
to skip to the beginning of the next message.
once to return to the start of the current message or twice to skip
back to the previous message.
to stop playback.
to mark message for deletion.
To delete individual messages
1. During message playback press the
button. Your BT Response 75+
announces ‘Message deleted’. The message is only marked for deletion at
this stage, not actually deleted. Once the message counter has counted down
from 8 to 0 at the end of message playback, all messages marked for deletion
are deleted.
To cancel message deletion
1. By pressing the
button during the 8 second countdown at the end of all
message play, the messages selected for deletion will be saved.
To Next Page
Loading...
Need help?
General
