. VIP will be switched on.
Repeat the procedure to switch VIP off again.
To check the VIP code and setting
1. Press and release the
button. The 2 digit VIP code will be announced and
whether the VIP setting is on or off.
To change the VIP code
1. Press and keep holding
.
2. Use the
and buttons to choose a number between 00 to 59.
When you reach the number you want, release the
button and your new
code will be announced.
1471 feature
After each incoming message your Response 75 is set to dial the free 1471 service
and record the announcement that gives you the telephone number of your caller
whether they leave a message or not. Therefore, when you play back messages
you will be given the caller’s number and time of the call.
The message display will show
when dialling the 1471 service. The 1471
feature is pre-set to on but can be switched off.
To switch 1471 on/off
Press the
button. You will hear ‘1471 on or off’ as appropriate.
Please note
Your BT Response 75+ will automatically record
the free 1471 service announcement of the day
and time of the last call to your number:
(i) Consequently the day of the call will always be
recorded as ‘today’. Therefore it is recommended
that you check your messages on a daily basis.
The free 1471 announcement also asks if you
wish to return the call. In fact you are not able
to do this.
(ii) There is a small chance that the wrong number
is associated with a message. This is because a
2nd call may arrive whilst a 1st callers message
is being recorded and your BT Response 75+
cannot call back until after the message has been
completed.
To Next Page
Loading...
