BT Versatility - Page 71

BT Versatility
Owner's Manual
71
• If a Line is programmed to ring directly at your extension and your Voice Mailbox is turned
on, dial the Line number.
• If you do not have a Line ringing directly to your extension dial in on an Auto-attendant
Line, and when you receive the Auto-attendant message dial your extension number.
• Call in on a line which you know will be answered and have the call transferred to your
Mailbox.
• When answered by your voicemail greeting, access your Voice Mailbox by dialling the code
711, followed by your extension number, Voicemail Password and #.
Then dial the following numbers to access your messages
While listening to the Greeting
• Dial 1 Playback commences at the first message
• Dial 91 Change the outgoing greeting
• Dial 92 Check the outgoing greeting
• Dial 93 Delete the outgoing greeting
• Dial 0 Change Voicemail Password
When playback of messages has commenced
• Dial # Playback is paused
• Dial 2 Save this message and move to the next message
• Dial 3 Erase this message and move to the next message
• Dial 4 Go back to the start of the message
• Dial 5 Go back to the previous message
• Dial 6 Erase all messages
• Dial 7 Go back ten seconds
• Dial 8 Go forward ten seconds / Skip the time stamp
• Dial 9 Forward the message to another extension
• Dial 0 Return Call. Automatically make a call to the caller who left the message (this feature
is not applicable when mail box is accessed remotely).