BTECH GMRS-50V2 - Page 62

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
55
12
T-DCS
Transmit - DCS
Code
D023N > D754I
Transmits specified code
OFF
No DCS code transmitted
13
T-CTCS
Transmit - CTCSS
Code
67.0 > 254.1 Hz
Transmits specified tone
OFF
No CTCSS tone transmitted
14
DTMFST
Determines
when DTMF
codes are heard
through speaker
OFF
No DTMF tone heard
KEY
Only manually keyed DTMF codes are heard
ID
Only automatically keyed DTMF codes are heard
BOTH
All DTMF codes are heard
15
BCL
Busy Channel
Lockout
ON
Prevents transmit if active signal on the channel
OFF
No lockout
16
SC-ADD
Add Scan
Channel
ON
Add channel to scan list
OFF
Remove channel from scan list
17
SC-REV
Scan Resume
Method
TO
(Time Operation) Scan stops when signal
detected. The scan resumes after approximately
5 seconds (even if the channel is still active).
CO
(Carrier Operation) Scan stops when signal
detected. Scan resumes when signal disappears.
SE
(Search Operation) Scan stops when signal
detected. Scanning will not resume.
18
OPTSIG
Optional
Signaling
OFF
No optional signaling
DTMF
DTMF signaling selected
2TONE
2TONE signaling selected
5TONE
5TONE signaling selected