BTECH GMRS-50V2 - Page 63

56
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-50V2!
!
!
!
19
SPMUTE
Speaker Mute
Settings
QT
Squelch opens for CTCSS/DCS tones only.
AND
Squelch opens when CTCSS/DCS tone is
recognized along with the optional signaling.
OR
Squelch opens when either the CTCSS/DCS tone
OR the optional signaling is recognized.
20
PTT-ID
PTT ID - When to
send
OFF
Do not send
BOT
Send at Beginning of Transmission
EOT
Send at the End of Transmission
BOTH
Send at both Beginning and End
21
PTT-LT
PTT ID -
Transmit Delay
0 > 30
Set Delay Time before transmitting PTT-ID
22
S-INFO
Auto Group
Dialing
Group Signal Code Memory
1 > 15
Can only be set with software
23
EMC-TP
Alarm Mode
OFF
Alarm Mode Completely Disabled
ALARM
Turn on Alarm sound
ANI
Send Alarm code and ID code
BOTH
Both of the above
24
EMC-CH
Alarm Channel
000 > 255
Specified Alarm Channel
25
SIG-BP
Signal Beep
ON
Pager Ring at Reception of Matching
2Tone/5Tone/DTMF
OFF
Tone OFF
26
CHNAME
Channel Name
Edit
In Channel Mode, edits the Current
Name