Buchi F-305 - Overview: Setting up Communication Connections

BÜCHI Labortechnik AG Installation | 5
Operation Manual Recirculating Chiller F-305 / F-308 / F-314 23/42
5.4.1 Overview: setting up communication connections
The laboratory apparatus can be connected in any order. Important: as well as the
Interface I-300/I-300 Pro, a VacuBox also has to be connected.
Below is an example of the connections between the laboratory apparatus.
Vacu
Box
Recirculating
Chiller F-3XX
Interface I-300/
I-300 Pro
Rotavapor
R-300
Vacuum Pump
V-300
Fig.12: Schematic diagram of communication connections between the BUCHI laboratory
equipment (example)
u Connect the Recirculating Chiller F-3xx to the Rotavapor R-300.
u Connect the Rotavapor R-300 to the VacuBox.
u Connect the VacuBox to the Vacuum Pump V-300.
u Connect Rotavapor to the Interface I-300/I-300 Pro.