4 Working without the Autosampler K-371
13 K-370/371 Quick Guide, Version B
Select the Group Meat 1006 and press the Enter
key to open the Group.
Place the tube with Blank 20 into the instrument.
Press [Run] to start Blank 20.
The display switches to the Status mode and
shows the different steps of the determination
method. At the end of the determination, State
will show Ready.
Press [Page] to see the Result of Blank 20.
Place the next tube (Blank 21) into the instru-
ment.
Press the Mode key to switch to the Operator.
Select the next sample (Blank 21) and start the
determination by pressing [Run].
The display switches to the Status mode and
shows the different steps of the determination
method. At the end of the determination, State
will show Ready.
Press [Page] to see the Result of Blank 21.
To Next Page
Loading...
