6 Daily maintenance after working with the instrument
18 K-370/371 Quick Guide, Version B
6 Daily maintenance after working with the instrument
6.1 Cleaning the instrument
At the end of the day, the system should be rinsed thoroughly by carrying out a cleaning. The splash
protector and the condenser are rinsed with water to remove sodium hydroxide residues. With regular
cleaning, the lifetime of the glass parts can be extended.
Select Operator > System preparation > Cleaning and press [Run] to start the cleaning process.
6.2 pH electrode
Rinse the pH electrode and store it in 3 mol/l KCl solution.
To Next Page
Loading...
