Buchi K-370 - Definition of Blank Consideration

4 Working without the Autosampler K-371
14 K-370/371 Quick Guide, Version B
4.1.4 Definition of blank consideration
NOTE
This step only needs to be carried out when sample definition in a group should be performed with
blank correction.
The mean value of the blank determinations,
Blank 20 and Blank 21, is set to be considered
for the following determination of samples.
Select Operator > Determination > Group >
Group Name (e. g. Meat 1006) and press the
Enter key .
Press [Blank].
Select the first blank value (e. g. Blank 20)
and press [First].
Select the last blank value (e. g. Blank 21)
and press [Last].