Buchi N-500 NIRFlex - Nirflex Fiber Optic SMA

4 Description of function
43
NIRFlex N-500 Operation Manual, Version G
4.6.18 NIRFlex Fiber Optic SMA
The NIRFlex Fiber Optic SMA is the ideal configuration to measure both, liquids and solids with
external accessories. The SMA-cell can be used to connect mono or multi fibers via its two SMA
connectors. Laboratory and immersion process probes in transmission or diffuse reflection mode as
well as flow-through cells can be attached.
NIRFlex Fiber Optic SMA
NOTE
• Glas fibers have to be handled with care. Do not bend, pull or twist the fibers! Follow the supple-
mentary instructions of the fiber and accessories. See also section 5.8!
• Depending on the application, distances of up to 100 m can be realized.
• External referencing has to be perfomed with clean and dry accessory!