2
1
3
In the front of the main cover of NIRFlex N-500
there is an opening which is hidden behind the
“Locked - Unlocked” shield. For the operation
of the transportation lock pull out the shield first.
Insert the torx screwdriver supplied with the
instrument and flip the locking mechanism by
moving it to the side.
a LOCKING movement
b Output window of the interferometer
c UNLOCKING movement
The installation position of the shield depends
on the locking status of the transportation lock.
The label of the shield in this image indicates a
locked transportation lock.
Operating the transportation lock
5.2 Requirements concerning the installation site
Basic installation conditions
!
DANGER
Death or serious injuries by use in explosive environments.
• Do not store or operate the instrument in explosive environments
• Remove all sources of flammable vapors
• Do not store chemicals in the vicinity of the device
To Next Page
Loading...
