Buchi Rotavapor R-100 - Removing the Receiving Flask

6 | Operation BÜCHI Labortechnik AG
38/60 Operation Manual Rotavapor® R-100
6.3.2 Removing the receiving flask
u Raise the rotary drive unit (see Chapter6.2.1 "Raising and lowering the evaporat-
ing flask", page33).
u Vent the Rotavapor.
u Turn off the rotary drive unit (set the rotation speed to 0rpm).
u Firmly hold the receiving flask (3), remove the ball joint clamp (2) and remove the
receiving flask.
u Make sure that any dripping condensate cannot cause any damage.