8 | Help with faults BÜCHI Labortechnik AG
44/60 Operation Manual Rotavapor® R-100
8.2 Remedy
8.2.1 Resetting overheat safety cut-out
CAUTION
Risk of skin burns from hot components
u Do not touch hot components unless wearing suitable protective gloves.
u Switch off the device.
u Unplug the power supply for the heating bath and rotary drive unit.
u Allow the heating bath to cool down then empty it.
u Using a narrow object or screwdriver, press the switch (1) on the underside of the
heating bath.
5 The overheat safety cut-out is reset.
To Next Page
Loading...
