EasyManua.ls Logo

Buchi Rotavapor R-100 - Accessories

Buchi Rotavapor R-100
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BÜCHI Labortechnik AG Appendix | 10
Operation Manual Rotavapor® R-100 51/60
10.2.3 Accessories
Heating Bath
Heating Bath B-100. 20-95°C, 220-240V
Heating power: 1300 W, maximum flask size: 4000 mL. Allows adjust-
ment of set temperature and indicates actual temperature digitally.
11061895
Heating Bath B-100. 20-95°C, 100-120V
Heating power: 1300 W, maximum flask size: 4000 mL. Allows adjust-
ment of set temperature and indicates actual temperature digitally.
11061894
Accessories for heating bath
Top cover. For Heating Bath B-491, B-100
To safe energy and to minimize water evaporation when not in use
048230
Protective shield. For Heating Bath B-491, B-100 048052
Swimming balls. 450pcs, PP, Ø10mm
To reduce energy consumption of heating bath and for less evaporation
of the heating medium, for temperatures up to 100 °C
036405
Tubing
FEP, Ø6/8mm, transparent, per m
Utilization: Vacuum, cooling media
027900
Natural rubber, Ø6/16mm, red, per m
Utilization: Vacuum
017622
Nyflex, PVC-P, Ø8/14mm, transparent, per m
Utilization: Vacuum, cooling media, feeding (industrial Rotavapor)
004113
PTFE, Ø4.7/5.5mm, transparent, 330mm
To initate solvent into the evaporating flask during distillation
000646
PTFE, Ø8/10mm, white, per m
Utilization: Vacuum, feeding (industrial Rotavapor)
027277
Silicone rubber, Ø6/9mm, transparent, per m
Utilization: Cooling media
004133
Further accessories
Flask holder. Ring, non-slippery EPDM
Holder for round-botton flasks (50 – 5000 mL)
048618
Flask holders, set. 5pcs, ring, non-slippery EPDM
Holder for round-botton flasks (50 – 5000 mL)
11059916
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation, only used in combi-
nation with a vacuum controller/interface
031356
Lab grease. Glisseal 40 (60g)
To grease the joints in order to increase tightness of the system
048197
Manometer with needle valve. Incl. holder for pump, valve, vac-
uum gauge
For manual vacuum adjustment
047291
Power adapter. 24VDC, voltage 100-240V, frequency 50/60Hz
For operation of Rotavapor without heating bath
11055312

Table of Contents

Related product manuals