Buffalo GL190 - User Manual

Questions and Answers

T
Terry EdwardsAug 9, 2025
Why is my Buffalo Mixer not working?
- C
  Christopher WilkinsAug 10, 2025
  Your Buffalo Mixer might not be working due to several reasons. First, ensure the unit is correctly plugged in and switched on. If it's a GJ461 model, check the Stop button and turn it clockwise to release it. Also, examine the plug for a blown fuse and replace it if necessary. Confirm that the appliance is in gear, the bowl is fully raised, and the safety guard is completely closed. Finally, check the power supply. For damaged plugs or leads, contact a qualified technician.
J
Jennifer CraigAug 14, 2025
What to do if my Buffalo Mixer is overheating?
- B
  Brent DuncanAug 14, 2025
  If your Buffalo Mixer is overheating, it could be due to two main reasons. The mixing bowl might be overloaded, in which case you should turn off the appliance and remove some of the contents. Alternatively, the appliance may have been operating for too long; if so, turn it off and allow it to cool down for 30 minutes.
T
thomascrosbyAug 19, 2025
Why is my Buffalo Mixer so noisy?
- M
  Michael EdwardsAug 19, 2025
  If your Buffalo Mixer is making excessive noise, the bowl or mixing attachment might not be correctly fitted; try removing and refitting them. If the noise persists, it could indicate worn bearings, damaged gears, or dried-up grease in the gearbox, in which case you should contact a qualified technician.
S
Susan BrownAug 25, 2025
How to fix Buffalo Mixer if bowl won't fit?
- M
  Michelle SimpsonAug 25, 2025
  If the bowl of your Buffalo Mixer won't fit back into place, the bowl pins or the surrounding area might be clogged with mix. Clean the appliance to resolve this issue.
D
David PaulAug 29, 2025
What to do if I cannot select gear on my Buffalo Mixer?
- R
  ryan62Aug 29, 2025
  If you cannot select a gear on your Buffalo Mixer, the gearing cogs might be misaligned. Turn off the appliance and manually turn the whisk attachment slightly, then try selecting the gear again.
J
Joseph HallSep 3, 2025
Why does the mixing attachment on my Buffalo Mixer fail to rotate properly?
- B
  Brenda BookerSep 3, 2025
  If the mixing attachment on your Buffalo Mixer isn't rotating properly, the belt may have become loose. In this case, contact a qualified technician.