8 Click the settings icon ( ) to the right of “Folder Setup”.
9 Click the shared folder that you want to set access restrictions for.
10 Click the Access Restrictions tab.
11 Enable “Access Restrictions for Shared Folders”.
12 Select the level of access for the user or group.
: Read and write : Read-only : No access
13 Click OK.
Notes:
• To have the LinkStation join an Active Directory domain, configure it to use a DNS server that can resolve names
for the Active Directory domain.
• After building an Active Directory domain, the administrator password for joining the domain must be changed
at least once, or joining the Active Directory domain will fail.
• The DNS name and NetBIOS name of Active Directory domains should be identical.
• If your LinkStation is a member server in an Active Directory domain and you change the authentication method
to “Workgroup”, the account on the domain controller will not be deleted automatically.
40
To Next Page
Loading...
