Buffalo LS420D - Page 21

21
Accessing the LinkStation with an FTP client
• To access the LinkStation via FTP, configure your FTP client software with the following settings:
Hostname: IP address of the LinkStation
Username: The LinkStation’s username
Password: The LinkStation’s password
Port: 21
• Shared folders connected by FTP are available from the “/mnt” directory. The default locations are:
For RAID 0 or RAID 1:
/mnt/array1/share
/mnt/usbdisk1
/mnt/usbdisk2
For JBOD:
/mnt/disk1/share
/mnt/disk2/share2
/mnt/disk3/share3
/mnt/disk4/share4
/mnt/usbdisk1
/mnt/usbdisk2
Accessing the LinkStation with an anonymous user: