Buffalo WZR-D1800H User Manual

- 98 -
Chapter 5 Trouble Shooting
TCP/IP Settings (Windows XP)
To congure TCP/IP in Windows XP, follow the procedure below.
1
Click [Start] > [Settings] > [Control Panel].
2
Double-click [Network].
3
Right-click on [Local Area Connection], then click [Properties].
4
Select [Internet Protocol (TCP/IP)], then click [Properties].
5
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Examples:
If the router’s IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
6
Click [Close].

Buffalo WZR-D1800H Specifications

General

Brand	Buffalo
Model	WZR-D1800H
Category	Network Router
Language	English