Burkert 0641 - Page 15

03 ATEX5014 X - 15
english
3.1.1 Marking of the mounted solenoid valves
The letters A, L and K are used to differentiate between the electrical con-
nection variants for the electromagnets.
Internal code:
The internal code is used for the marking of the mounted solenoid valves.
Marking Version Internal
code
A - Permanently installed rubber hose line of the
type H05 RN-F3G 0,75
without
data
L
- Terminal box with M 20 x 1.5 cable gland,
without fuse
JA02
- Terminal box with threaded nipple M 20 x 1.5,
without fuse
JA08
- Terminal box with threaded nipple NPT ½,
without fuse
JA09
- Terminal box with threaded nipple G ½,
without fuse
JA10
K
- Terminal box with M 20 x 1.5 cable gland
and fuse
JA01
- Terminal box with M 20 x 1.5 threaded nipple
and fuse
JA05
- Terminal box with NPT ½ threaded nipple
and fuse
JA06
- Terminal box with G ½ threaded nipple
and fuse
JA07
NOTES!
Connection types with terminal box
Available with / without unit protective fuse.