Why Burkert Control Unit valve does not switch?
The Burkert Control Unit valve may not switch due to a short-circuit or coil interruption, a dirty core or core area, or medium pressure being outside the permitted pressure range.
What to do if Burkert 6213 Control Unit has visible damage after external fire?
If the Burkert Control Unit has been exposed to an external fire, check the equipment and safety shut-off device. If there is visible damage, replace the shut-off device.
Explains symbols for warnings/procedures and general operating instructions.
Covers high pressure, electrical shock, burns/fire, and general hazardous situations.
Details delivery checks, contact addresses, and online information sources.
Outlines warranty terms, limitations, and product approval information.
Lists allowable temperatures and permitted media based on seal material.
Covers operating duration, service life factors, CE conformity, and rating plate description.
Covers safety precautions, pipeline checks, and dirt filters before installation.
Details screwing the device into the pipeline and electrical connection steps.
Safety for maintenance, coil installation, and torque specifications.
Identifies common malfunctions and their potential causes for troubleshooting.
Warns against incorrect parts and guides on ordering original spare parts.
Provides a visual guide to available replacement part sets.
Details how to protect the device during transport and proper storage conditions.
Emphasizes observing regulations for disposal of contaminated components and the environment.
General| Body Material | Brass, Stainless steel |
|---|---|
| Seal Material | NBR, FKM, EPDM |
| Voltage | 24 V DC |
| Protection Class | IP65 |
| Operating Temperature | -10°C to +50°C |
To Next Page
