Need help?Do you have a question about the Burkert 2000 and is the answer not in the manual?
General| Model | 2000 |
|---|---|
| Manufacturer | Burkert |
| Ambient Temperature | -10 to +60 °C |
| Protection Class | IP65 |
| Operating Temperature | -10 to + °C |
| Seal Material | FKM |
| Operating Pressure | 0- bar |
| Fluid Temperature | -10 to + °C |
Describes the valve assembly (actuator, valve body) and how it operates.
Explains how the valve operates when flow is below the seat and potential leakage issues.
Shows minimum pilot pressure required for control function A with flow direction below seat.
Lists critical safety precautions for installing the device to prevent injury and damage.
Cautions about installing welded devices and procedures for actuator removal.
Describes actuator removal when a control unit is installed, stressing valve open position.
Guides on installing the actuator, checking the seal, and using appropriate lubricants.
Explains how to rotate the actuator for port alignment, emphasizing valve open position.
Details how to connect control medium to pilot air ports for different control functions.
Lists safety precautions for performing maintenance tasks on the device.
To Next Page
