Type 2000
Basic safety instructions
8
3 BASIC SAFETY INSTRUCTIONS
These safety instructions do not take into account any unforeseen circumstances and events which occur
during installation, operation and maintenance.
The operator is responsible for observing the location-specific safety regulations, also with reference to the
personnel.
DANGER!
Risk of injury from high pressure and discharge of medium.
▶ Before working on the device or system, switch off the pressure. Vent or drain lines.
DANGER!
Electric shock due to installed electrical component.
▶ Before working on the device or system, switch off the power supply. Secure against reactivation.
▶ Observe the applicable accident prevention and safety regulations for electrical devices.
WARNING!
Risk of injury when opening the actuator.
The actuator contains a spring under tension. When the actuator is opened, the spring will jump out and
may cause injuries.
▶ Do not open the actuator.
WARNING!
Risk of injury due to moving parts.
▶ Do not reach into openings in the device.
WARNING!
Danger of burns and risk of fire.
Quickly switching actuators or hot medium may cause the surface of the device to become hot.
▶ Only touch the device while wearing protective gloves.
▶ Keep the device away from highly flammable substances and media.
WARNING!
Danger due to loud noises.
Depending on the usage conditions, the device may generate loud noises. Detailed information on the
probability of loud noises is available from the respective sales department.
▶ Wear hearing protection when in the vicinity of the device.
WARNING!
Discharge of medium if packing gland worn.
▶ If media are hazardous, safeguard the environment around the discharge point.
To Next Page
Loading...
Need help?
General
