Why Burkert 5282 valve does not switch?
The Burkert Control Unit valve may not switch due to a short-circuit or coil interruption, medium pressure being outside the permitted range, or the manual emergency actuation being locked.
General| Brand | Burkert |
|---|---|
| Model | 5282 |
| Category | Control Unit |
| Language | English |
Provides essential guidance for the safe and effective operation of the Type 5282 solenoid valve.
Explanation of safety symbols used in the manual to denote danger, warning, caution, and notes.
Clarifies that 'device' refers specifically to the Type 5282 solenoid valve throughout the document.
Details general safety precautions and conditions to prevent injury, especially in hazardous environments.
Outlines the conditions under which the product warranty remains valid.
Provides website addresses for accessing additional product documentation and data sheets.
Specifies operating parameters such as voltage, power consumption, pressure range, and material types.
Lists permissible fluid and ambient temperatures for different seal materials and approvals.
States that the Type 5282 conforms with EU Directives and the EU Declaration of Conformity.
Indicates where to find standards verifying conformity with EU Directives.
Explains the location and inscription of the product's type label with an example.
Provides critical safety warnings and precautions to be taken before, during, and after installation.
Outlines installation position recommendations and pre-installation checks like pipeline cleaning and filter installation.
Describes the procedure for physically installing the device, including tool usage and flow direction.
Explains how to manually operate the valve in emergency situations and notes its locking status.
Details the process for changing the valve's function, including torque limits and O-ring insertion precautions.
Explains how to adjust the valve's closing and opening times using side throttle screws and notes pressure surge risks.
Details the electrical connection process, including safety warnings and circuit diagrams.
Provides a circuit diagram and connection procedure for pulse-controlled electrical connections, including safety notes.
Details safety precautions for maintenance and troubleshooting, emphasizing risks from pressure, electricity, and unintentional activation.
Lists common malfunctions, their possible causes, and initial checks to perform.
Explains how to order spare parts, referencing replacement sets and the device's identification number.
Presents an exploded view of the device, illustrating components and spare part sets.
To Next Page
