Need help?Do you have a question about the Burkert 6014 and is the answer not in the manual?
General| Seal Material | FKM, EPDM, NBR |
|---|---|
| Operating voltage | 24 V DC |
| Voltage | 24 V DC |
| Media | Liquids, gases |
| Housing material | Plastic |
| Protection class | IP65 |
| Relative humidity | 95% non-condensing |
| Ambient temperature | -10 to +55 °C |
| Storage temperature | -20 - 60 °C |
Explains symbols used for risks and procedures.
Outlines restrictions when exporting the product.
Clarifies terms "device" and "product" used in the manual.
Details the product approval marks and numbers.
Explains conditions for Ex approval validity.
Precautions for high pressure hazards.
Precautions for electrical shock hazards.
Precautions for burn and fire hazards.
General safety measures to prevent injury.
Details the direct-acting solenoid valve Type 6014.
Details the pilot valve Type 6014P.
Lists compliance with EU and UK legislation.
Specifies ambient temperature and degree of protection.
Details port connections and materials.
Covers medium temperature, viscosity, and circuit functions.
Explains the components of the valve's type label.
Details connection, operating voltage, and power.
Safety precautions for high pressure during installation.
Safety precautions for electrical shock during installation.
Safety precautions for improper installation.
Instructions for fluid installation, including dirt traps.
Steps for connecting the electrical cable plug.
Notes on polarity and pulse duration for pulse versions.
Instructions and warnings for rotating the coil.
Covers risks from pressure, shock, burns, fire, and improper maintenance.
Guidance on checking for malfunctions.
Steps for disassembling the valve.
Notes on preventing damage during transport.
Guidelines for proper storage to prevent damage.
Instructions for environmentally friendly disposal.
To Next Page
