Burkert 6014 - Restrictions; Definition of Term; Approvals; Ex Approval

3
2.4 Ex approval
The Ex approval is only valid if you use the modules and components
authorized by Bürkert as described in these operating instructions.
You may use the electronic modules only in combination with the
pneumatic valve types released by Bürkert, otherwise the Ex approval
will be void!
If you make unauthorized changes to the system, the modules or
components, the Ex approval will also be void.
2.1 Restrictions
If exporting the product/device, observe any existing restrictions.
2.2 Denition of term
In these operating instructions, the term “device” or “product” always
refers to the solenoid valve Type 6014.
2.3 Approvals
The approval mark indicated on the Bürkert type labels refers to the
Bürkert products.
e 1
03 5791
Devices which must bear the type approval mark were approved at
the Kraftfahrtbundesamt under the type approval number
e1*72/245*2006/96*5791*00
and are put into circulation with the indicated type approval mark.
You can obtain an extract of the type approval from the address
below.
Bürkert Werke GmbH
Zulassungsbeauftragter,
Christian-Bürkert-Str. 13-17,
D-74653 Ingelngen
english