Burkert 6014 - BASIC SAFETY INSTRUCTIONS; High Pressure Risk; Electric Shock Risk; Burn;Fire Risk

4
3 BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any contin-
gencies and events which may arise during installation, operation
and maintenance.
Risk of injury from high pressure in the equipment/device.
▶ Before working on equipment or device, switch o the pressure
and deaerate/drain lines.
Risk of electric shock.
▶ Before working on equipment or device, switch o the power
supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of burns/Risk of re if used continuously through hot
device surface.
▶ Keep the device away from highly ammable substances and
media and do not touch with bare hands.
General hazardous situations.
To prevent injury, ensure that:
▶ The system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only.
▶ After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a dened or controlled
manner.
▶ The device may be operated only when in perfect condition and
in consideration of the operating instructions.
▶ The general rules of technology apply to application planning
and operation of the device.
To prevent damage to property of the device, ensure:
▶ Supply the media connections only with those media which are
specied as ow media in the chapter entitled “5 Technical data”.
▶ With alternating voltage, ensure that the core can move.
▶ Do not put any loads on the device (e.g. by placing objects on it
or standing on it).
▶ Do not make any modications to the device. Do not paint the
body parts or screws.
english