Burkert 6014 - Electrical Data; INSTALLATION; High Pressure Safety; Electric Shock Safety

8
5.6 Electrical data
Connection DIN EN 175301-803 (DIN 43 650), form A
for cable plug Type 2508/2518
Operating voltage 24 V DC ± 10 % - max. residual ripple 10
%
24 V / 50 Hz
230 V / 50 Hz
Voltage tolerance ± 10 %
Nominal output 8 W
Impulse version 7 W
Nominal operating mode 100 % continuous operation
for block installation 5 W continuous operation on request
8 W intermittent operation 60 % (30 min)
6 INSTALLATION
DANGER!
Risk of injury from high pressure in the equipment/device.
▶ Before working on equipment or device, switch o the pressure
and deaerate/drain lines.
Risk of electric shock.
▶ Before working on equipment or device, switch o the power
supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only
and with the appropriate tools!
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
english