Type 2000
Start-up
28
8 START-UP
DANGER!
For control function I: Danger due to the control pressure failing.
If the control pressure fails, the valve remains in an undefined position.
▶ For a controlled restart, pressurize the device with control pressure and then connect the medium.
WARNING!
Risk of injury from high pressure or hot medium.
Excessively high pressure or temperatures may damage the device and cause leaks.
▶ Observe values for pressure and medium temperature indicated on the type label.
In the case of devices with control unit, observe start-up in the operating instructions for the corres-
ponding control unit.
Adjust pilot pressure in accordance with information on type label and in technical data.
To Next Page
Loading...
