Burkert 2000 User Manual

Type 2000
Servicing
31
▪ Swivel plate
If leaks occur, replace the respective wearing part.
10.2.3 Visual inspection
According to the usage conditions, perform regular visual inspections:
Check medium ports for tightness.
Check relief bore on the pipe for leaks.
Relief bore
Fig.21: Relief bore
10.2.4 Cleaning
Commercially available cleaning agents can be used to clean the outside.
ATTENTION!
Avoid causing damage with cleaning agents.
▶ Before cleaning, check that the cleaning agents are compatible with body materials and seals.

Burkert 2000 Specifications

General

Model	2000
Manufacturer	Burkert
Ambient Temperature	-10 to +60 °C
Protection Class	IP65
Operating Temperature	-10 to + °C
Seal Material	FKM
Operating Pressure	0- bar
Fluid Temperature	-10 to + °C