Type 2000
Intended use
7
2 INTENDED USE
The angle seat valve Type 2000 is designed to control the flow rate of media. The permitted media are lis-
ted in the "Technical data".
▶ Use the device for its intended purpose only. Non-intended use of the device may be dangerous to
people, nearby equipment and the environment.
▶ Correct transportation, correct storage as well as correct installation, commissioning, operation and
maintenance are essential for reliable and problem-free operation.
▶ When using the device, observe the permitted data, operating conditions and application conditions.
This information can be found in the contractual documents, the operating instructions and on the type
label.
▶ Use the device only in conjunction with third-party devices and components recommended and author-
ized by Bürkert.
▶ In potentially explosive atmospheres, only use devices approved for use in those areas. These devices
are labeled with a separate Ex type label. For such use, note the information provided on the separate
Ex type label and the additional explosion-related information or separate explosion-related operating in-
structions.
▶ Protect device from environmental influences (e.g. radiation, air humidity, fumes). If you have any ques-
tions, contact your Bürkert sales department.
To Next Page
Loading...
Need help?
General
