Type 2000
Basic safety instructions
9
To prevent injuries, observe the following:
▶ Secure device or plant to prevent unintentional activation.
▶ Only trained technicians may perform installation and maintenance work.
▶ Perform installation and maintenance with suitable tools only.
▶ Heavy equipment must only be transported, assembled, installed or dismantled with the help of a
second person as appropriate and using suitable apparatus.
▶ Following interruption of the process, ensure that the process is restarted in a controlled manner.
Observe sequence:
1. Apply electrical or pneumatic supply.
2. Charge with medium.
▶ Do not make any changes to the device and do not subject it to mechanical stress.
▶ Feed only those media, which are listed in the chapter "Technical data", into the medium ports.
▶ Operate the device only in perfect state and in consideration of the operating instructions.
▶ For applications planning and operation of the device, observe the plant-specific safety regulations.
▶ Observe the general rules of technology.
▶ The plant owner is responsible for the safe operation and handling of the plant.
To protect the environment, observe the following:
▶ The pilot exhaust air of the device may be contaminated by lubricants.
To Next Page
Loading...
