Why is the motor current too high in my Burkert Control Unit?
If the motor current is too high in the Control Unit by Burkert, it could be due to increased friction in the actuator train or incorrect detection of the end positions. Carry out the X.TUNE function. Contact Bürkert Service if the problem persists.
What to do if the Control Unit by Burkert detects overvoltage?
If the Control Unit by Burkert detects overvoltage, it means the supply voltage is too high for the device to operate. You should check the supply voltage.
What to do if the Control Unit by Burkert shows 'Temperature warning limit undershot'?
If the Control Unit by Burkert displays a temperature warning limit undershot, it indicates that the ambient temperature is too low. Increase the ambient temperature.
What to do if the Control Unit by Burkert shows 'Temperature warning limit exceeded'?
If the Control Unit by Burkert displays a temperature warning limit exceeded, it indicates that the ambient temperature is too high or there is increased friction in the actuator train. Reduce the ambient temperature. Contact Bürkert Service if the problem persists.
Why is the motor temperature too high and idling on Burkert 3360 Control Unit?
If the motor temperature is too high and the motor is idling to prevent thermal damage on the Control Unit by Burkert, it indicates too much friction in the actuator train for operation. Contact Bürkert service.
Why is the motor temperature too high and moving to safety position on Burkert Control Unit?
If the motor temperature is too high and the motor is moving to the safety position on the Control Unit by Burkert, it indicates too much friction in the actuator train for operation. Contact Bürkert service.
Why is the motor temperature high on my Burkert 3360 Control Unit?
If the motor temperature is high on the Control Unit by Burkert, it could be due to increased friction in the actuator train. Contact Bürkert Service if the problem persists.
What to do if the Control Unit by Burkert detects low temperature?
If the Control Unit by Burkert detects a low temperature, it means the device temperature is too low for operation. Increase the ambient temperature.
What to do if the Control Unit by Burkert detects excess temperature?
If the Control Unit by Burkert detects excess temperature, it signifies that the device temperature is too high for operation. Reduce the ambient temperature. If the problem persists, contact Bürkert Service.
What to do if Burkert 3360 Control Unit says 'No energy storage available'?
If the Control Unit by Burkert displays 'No energy storage available,' it means the SAFEPOS energy-pack is not detected. Check whether the SAFEPOS energy-pack is correctly installed.
General| Brand | Burkert |
|---|---|
| Model | 3360 Series |
| Category | Control Unit |
| Language | English |
To Next Page
