Burkert 8035 - General Information; Description Of The Rating Plate

7
General information
Type 8025 - 8035 - SE35 Batch
4. GENERAL INFORMATION
4.1. Manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use of
the device in observance of the operating conditions specified in the
Operating Instructions.
4.3. Information on the Internet
You can find the Operating Instructions and technical data sheets
regarding the type 8025 Batch, 8035 Batch and SE35 Batch at:
www.burkert.com
5. DESCRIPTION OF THE RATING
PLATE
BATCH SE35/8035 HALL SUPPLY: 12-36V... 100 mA
DO1&4: 5-36V... 100mA
DO2&3: 2xRelay 30V and 42V peak or 60V... max. IP65
S/N 20 000
00564398 W4YMA
Made in France
12
5
6791112
4
10
3
8
1. Type of the device
2. Sensor specifications
3. Specifications of the transistor outputs DO1 and DO4
4. Power supply and max. current consumption
5. Protection class of the device
6. Manufacturing code
7. Conformity marking
8. Certification
9. Warning: Before using the device, take into account the tech-
nical specifications described in the Operating Instructions.
10. Specifications of the relay outputs DO2 and DO3
11. Serial number
12. Article number
Fig. 1: Rating plate of the device (example)
English