Burkert 8045 - Available Versions

14
8045
ENGLISH
INSTALLATION
3.4.4 CONNECTION OF THE PULSE OUTPUT
The pulse output can be easily connected to a PLC or counter independently of the power
supply or version.
3.4.4.1 Connection of a PLC
Fig. 3.6 PLC with common - Fig. 3.7 PLC with common +
3.4.4.2 Connection of a load
Fig. 3.8 Electromechanical counter Fig. 3.9 Electronic counter with
or relay powered input
In the figures above ensure that the current does not exceed 100 mA.
For calculation of the load the following equation can be used;
Load =
V - 5
Example:
I
V = 30V
I = 20mA
Load = 1250 W
P+
-
+
I
V+
0V
INPUT
P-
P+
-
+
I
V+
0V
INPUT
P-
3.4.4
Current
Load
Load
Current
Current
Current
P+
-
+
I
V+
0V
P-
P+
-
+
I
V1
GND1
P-
V2
GND2