20
8045
ENGLISH
MAIN MENU
4.3 MAIN MENU
The following information is displayed within the Main Menu:
Flowrate : This is displayed in the selected engineering
units (see calibration menu).
Output Signal : The output signal is 4-20mA and is
proportional to the flow according to the selected measuring
range.
Main Totalizer : This is displayed in the required
engineering units (see calibration menu). To reset this
totalizer see section 4.4.8 in the next menu.
Daily Totalizer : This is displayed with the same
engineering units as the main totalizer. A point behind the
unit differentiates this totalizer from the main totalizer. To
reset this value, simultaneously press the keys for
2 seconds within this menu.
0......9
0......9
12.6 mL/S
16.45 mmA
80529 L
6247 L .
4.3
To Next Page
Loading...
