Burnham Apex APX399 - Product Description, Specifications and Dimensional Data

6
I. Product Description, Specications and Dimensional Data
Apex™ Series boilers are condensing high efciency
gas-red direct vent hot water boilers designed for use
in forced hot water space or space heating with indirect
domestic hot water heating systems, where supply water
temperature does not exceed 210°F. These boilers have
special coil type stainless steel heat exchangers, constructed,
tested and stamped per Section IV ‘Heating Boilers’ of
ASME Boiler and Pressure Vessel Code, which provide a
maximum heat transfer and simultaneous protection against
ue gas product corrosion. These boilers are not designed
for use in gravity hot water space heating systems or
systems containing signicant amount of dissolved oxygen
(swimming pool water heating, direct domestic hot water
heating, etc.).
Table 1: Dimensional Data (See Figures 1A, 1B and 1C)
Dimension
Boiler Model
APX399 APX500 APX800
A - Inch
(mm)
28-7/8
(734)
44-7/8
(1140)
54-9/16
(1384)
B - Inch
(mm)
6-3/16
(157)
22-1/8
(562)
28-3/8
(724)
C - Inch
(mm)
13-1/16
(332)
29
(737)
34-1/4
(876)
D - Inch
(mm)
23-3/4
(602)
39-11/16
(1008)
48-1/16
(1226)
E - Inch
(mm)
15-13/16
(402)
29-3/8
(752)
33-13/16
(864)
Gas Inlet F
(FPT)
3/4” 3/4” 1
Return G 1-1/2” (FPT) 2” (MPT)
Supply H 1-1/2” (FPT) 2” (MPT)
Condensate Drain J Factory Provided Socket End Compression Pipe Joining Clamp for 3/4” Schedule 40 PVC Pipe
Boiler Two-Pipe
CPVC/PVC Vent Connector
(Figures 1A, 1B and 1C) - Inch
4 x 4 6 x 6
Approx. Shipping Weight (LBS) 304 350 430