BUSCH RA 0205 D Installation And Operating Instructions

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installations- und

Betriebsanleitung

Installation and

Operating Instructions

Manuel d'installation

et de maintenance

Drehschieber-Vakuumpumpen R 5 0165 - 0305 D

Rotary Vane Vacuum Pumps R 5 0165 - 0305 D

Pompes à Vide Rotatives à Palettes R 5 0165 - 0305 D

Table of Contents

Other manuals for BUSCH RA 0205 D

Instruction Manual36 pages

Instruction Manual Supplement12 pages

Questions and Answers:

K
kayla05Sep 7, 2025
What to do if my BUSCH RA 0205 D Water Pump runs too hot?
- K
  Kirsten GibbsSep 7, 2025
  If your BUSCH Water Pump is running too hot, several factors could be the cause. Insufficient cooling may be the issue, so remove any dust and dirt from the machine. Also, the ambient temperature might be too high, so observe the permitted ambient temperature. Low oil level can also cause overheating, so top up the oil. Lastly, partially clogged exhaust filters (EF) could be the problem, in which case replace the exhaust filters (EF).
D
David MartinezAug 23, 2025
Why is the oil in my BUSCH RA 0205 D emulsified?
- B
  brianna29Aug 25, 2025
  If the oil in your BUSCH Water Pump is emulsified, it might be because the machine sucked in liquids or significant amounts of vapor, in which case you should contact Busch to flush the machine. Also, clean the filter of the gas ballast valve (GB). Consider modifying the operational mode.
D
David BentleyAug 25, 2025
Why BUSCH RA 0205 D fumes or expels oil?
- C
  Christopher ThompsonAug 26, 2025
  If your BUSCH Water Pump is fuming or expelling oil droplets, it could be due to: partially clogged exhaust filters (EF) – replace them; an exhaust filter (EF) with o-ring not fitted properly – ensure correct positioning; or a malfunctioning float valve (FV) – contact Busch for repair.
M
Meghan PollardAug 27, 2025
Why BUSCH RA 0205 D has abnormal oil consumption?
- C
  Chad MorganAug 27, 2025
  Abnormal oil consumption in your BUSCH Water Pump can stem from a few issues: oil leaks (contact Busch to replace seals), a malfunctioning float valve (FV) (contact Busch to check and repair the float valve and oil return line), or running the machine at atmospheric pressure for an extended period (ensure the machine operates under vacuum).
E
Eric RussellAug 27, 2025
What does it mean if the oil in my BUSCH RA 0205 D is emulsified?
- H
  hernandezbriannaAug 27, 2025
  If the oil in your BUSCH Water Pump is emulsified, it's likely that the machine has sucked in liquids or significant amounts of vapor.
C
Crystal FuentesAug 29, 2025
What to do if my BUSCH Water Pump does not start?
- G
  Gina PalmerAug 29, 2025
  If your BUSCH Water Pump doesn't start, it could be due to several reasons. First, check if the motor is receiving the correct voltage. If the voltage is correct, the motor might be defective and need replacement. Another possible cause is a defective coupling (CPL), which would also require replacement.
K
Kimberly AvilaSep 13, 2025
Why BUSCH RA 0205 D does not start?
- C
  Corey BrownSep 13, 2025
  Your BUSCH Water Pump might not start due to several reasons: the motor may not be receiving the correct voltage (check the voltage), the motor itself could be defective (replace the motor), or the coupling (CPL) might be defective (replace the coupling).
E
ethanrojasSep 8, 2025
Why BUSCH RA 0205 D Water Pump does not reach the usual pressure?
- B
  bensonmelindaSep 8, 2025
  If your BUSCH Water Pump isn't reaching the usual pressure on the suction connection, check these potential causes: The oil level might be too low, so top up the oil. The inlet screen (IS) could be partially clogged, so clean the inlet screen (IS). If your pump has an inlet filter cartridge (optional), it might be clogged, so replace the inlet filter cartridge. If none of these resolve the issue, internal parts may be worn or damaged, so repair the machine or contact Busch.
J
John RobinsonSep 5, 2025
Why my BUSCH RA 0205 D Water Pump does not start?
- C
  Cheryl CalhounSep 5, 2025
  If your BUSCH Water Pump doesn't start, it could be due to several reasons. First, the motor might not be getting the correct voltage, in this case check the power. Alternatively, the motor itself could be defective and need replacement. Finally, a defective coupling (CPL) could also be the culprit, so replace the coupling (CPL).
J
John HubbardSep 3, 2025
Why is my BUSCH RA 0205 D running very noisily?
- M
  Mary EllisSep 3, 2025
  If your BUSCH Water Pump is operating with excessive noise, it could be due to a worn coupling (CPL), which would need replacement. Alternatively, stuck vanes or defective bearings might be the cause, in which case you should contact Busch for machine repair.

BUSCH RA 0205 D Specifications

General

Type	Rotary vane vacuum pump
Ultimate pressure	0.1 mbar
Motor nominal power	5.5 kW
Weight approximately	340 kg
Oil capacity	12 l
Nominal motor speed	1500 min⁻¹
Gas inlet	DN 10 KF
Frequency	50 Hz
Inlet connection	G 2

Related product manuals

BUSCH R 5 RA 0202 D

BUSCH RA 0255 D

Preview: BUSCH R5 RA 0255 D

BUSCH R5 RA 0255 D

BUSCH R 5 RA 0250 D

Preview: BUSCH RA 0165 D

BUSCH RA 0165 D

BUSCH RA 0305 D

Preview: BUSCH R5 RA 0165 D

BUSCH R5 RA 0165 D

Preview: BUSCH R 5 RA 0160 D

BUSCH R 5 RA 0160 D

BUSCH R 5 RA 0302 D

BUSCH RA 0063 F

BUSCH RA 0100 F

Preview: BUSCH R5 RA 0063 F 5K

BUSCH R5 RA 0063 F 5K