RTG SERIES TILLER 05/16 Introduction Section 2-3
© 2015 Alamo Group.Inc.
INTRODUCTION
INTRODUCTION
The RT60G requires between 25 HP - 45 HP with adequate front end weight.
The RT60GR requires between 25 HP - 45 HP with adequate front end weight.
The RT72G requires between 35 HP - 55 HP with adequate front end weight.
The RT72GR requires between 35 HP -55 HP with adequate front end weight.
The RT84G requires between 45 HP - 65 HP with adequate front end weight.
The RT84GR requires between 45 HP -65 HP with adequate front end weight.
At least 20% of the tractor’s total weight must be on the front tires with the implement lifted
to provide adequate traction at safe steering under good conditions. Slow down on hills,
rough terrain and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your auto-
mobile).
Carefully read the Operator’s Manual completely, understand the Safety Messages and instructions, and
know how to operate correctly both tractor and tiller.
To Next Page
Loading...
