RTG SERIES TILLER 05/16 Operation Section 4-3
© 2015 Alamo Group.Inc
.
OPERATION
OPERATION
RTG SERIES RT60G RT72G RT84G
RT60GR RT72GR RT84GR
Working Width 59“ 70-1/2” 82-1/2”
Overall Width 66” 78” 90”
Type of Knives “L” “L” “L”
Knives Per Flange 666
Number of Flanges 7911
Tilling Depth *7-1/2” *7-1/2” *7-1/2”
Skid Shoe Settings 333
Rated Rotor Speed 211 RPM 211 RPM 211 RPM
Gearbox Housing Cast Cast Cast
Deck Thickness .1345” .1345” .1345”
End Plate Thickness .50” .50” .50”
Required Tractor HP 25-45HP 35-55 HP 45-65 HP
Driveline Size Cat 4 Cat 4 Cat 4
Gearbox Protection Slip Clutch Slip Clutch Slip Clutch
Rotor Drive Type Gear Driven Gear Driven Gear Driven
Hitch Cat 1 & Cat 1QH Cat 1 & Cat 1QH Cat 1 & Cat 1 QH
Cat 2 & Cat 2 QH
*Requires Multiple Passes
STANDARD EQUIPMENT and SPECIFICATIONS
Operating this implement in an application for which it is not designed and/or operating
the implement with the wrong size Tractor can cause implement component damage and
equipment failure resulting in possible serious injury or death.
To Next Page
Loading...
