BR10DAB
11
Selecting a Preset Station
You can select up to 10 DAB stations for easy access as follows:
Press the PRESET button once, the preset station 1 will show on DISPLAY.
Press the
buttons to select the store position.
Press the SELECT/NAV button to confirm.
If you have not already stored a DAB station in one of the presets [Not set] will be
displayed. The DISPLAY will revert to the previously selected station after a few
second.
Reset the DAB Stations
You can delete all of the preset stations and return the DAB Receiver to its factory
settings as follows :
Press and hold the MENU button
The DISPLAY will show ( Press “ INFO” to confirm reset )
Press the INFO button, the DISPLAY will show “ Welcome to Digital Radio ”
before performing a new scan for stations. The radio will be returned to its factory
condition.
If you do not wish to reset the radio, wait a few seconds without pressing any
buttons and the radio will revert to its previous operating condition.
Scanning for DAB Stations
Due to the nature of DAB, additional stations and services regularly become available.
If you wish to see if there have been any new DAB stations introduced in your area you
can initiate a search.
Press the SCAN button to activate a local search for stations. This will take
approximately 15 seconds. A wider search can be initiated by pressing and holding
down the SCAN button for approximately two seconds. In this case a full scan is
performed which will take approximately 60 seconds.
Storing DAB Presets
You can preset up to 10 DAB stations for easy access as follows:
Tune to the station you wish to preset (see Changing DAB Stations).
Press the PRESET button once, the preset station 1 will show on DISPLAY.
Press the
To Next Page
Loading...
