BR10DAB
15
Dynamic Range Control (DRC)
DRC adds or removes a degree of compression to compensate for the differences in the
dynamic range between radio stations. For example, a station broadcasting popular
music may have a high level of compression applied since the emphasis is on a constant
high listening level. Where as a station broadcasting classical music will have little or no
compression as the listener requires all of the highs and lows in the music to define the
detail.
There are three levels of compression:
DRC off = No compression applied
DRC high = Maximum compression applied (this is the default)
DRC low = Low compression applied
The best way to determine which of these settings suits you best is to experiment with them
on a variety of stations.
Press the MENU button to access the menu control.
Press either the
buttons until “DRC” is displayed.
Press the SELECT/NAV button to access “DRC value”.
Press the
buttons to select between the three DRC values. The available options
appear on line 2 of the DISPLAY. When the required DRC value is displayed press
SELECT/NAV button to confirm.
You should be able to hear the difference in compression immediately.
Station Order
This function enables you to define how the stations are arranged when scrolling the
stations list.
Press the MENU button to access the menu control
Press either the
buttons until “Station order” is displayed.
Press the SELECT/NAV button to access “Station order”.
Use either the
buttons to display the desired option. Press SELECT button to
confirm.
Using DAB Radio -Continued
There are three options available as described below.
Alphanumeric = The stations are arranged in numerical then alphabetical order.
Ensemble = Lists groups of stations that are broadcast together on the same
ensemble.
Valid = Lists valid stations first, alphanumerically, then off-air stations.
To Next Page
Loading...
