Page 5
DAB operation (cont)
NOTE: If when the unit was switched on, no
stations where found, or no DAB stations can
be received currently [No DAB station] will be
displayed. In this case you may need to perform
another station scan.
NOTE: Ensure the earphones are connected for
maximum reception.
DAB radio station full scan
Full scan: searches all DAB channels.
1: Press and hold the MENU button (8).
2: When the <Station List> option appears press either
TUNE UP (4) or DOWN (3) button to locate the <Full
Scan> option. Press the SELECT button to begin the
scan.
3: Once the scan has finished, the radio will select the
first alphanumeric station and begin playback.
DAB radio station manual tune
As well as an auto tune function, you can manually
tune the receiver. This can help when aligning your
aerial or when adding stations that were missed while
auto tuning.
1: Press and hold the MENU button (8).
2: When the <Station List> option appears press
either TUNE UP (4) or DOWN (3) button to locate the
<Manual Tune> option. Press the SELECT button to
select.
3: Use either TUNE UP (4) or DOWN (3) button to cycle
through the DAB Multiplexes, which are numbered
from 5A to 13F.
4: Now press the SELECT button to enter the current
ensemble/multiplex, the top line will now display
the frequency followed by the ensemble/multiplex
information. The unit will scan and store any available
stations on the selected ensemble/multiplex.
5: Press the SELECT button once more to return to
the Multiplex selection screen. Then press MENU to
return to the default screen.
6: To listen to the located DAB stations press either
TUNE UP (4) or DOWN (3) button to cycle through the
stations.
Storing DAB station presets
It is possible to store up to 10 of your favourite DAB
stations. This will enable you to access your favourite
stations quickly & easily.
1: To store a preset, you must first be listening to the
station that you would like to save, press and hold the
PRESET button (7) for 2 seconds. The LCD will then
show the following.
Preset Store
< 1: (Empty) >
08
:
42
DAB
2: Use the TUNE UP (4) or DOWN (3) buttons to choose
the preset number from 1-10 you wish to use. Then
press the SELECT button to store.
DAB
Preset 1
Stored
08
:
42
Recalling DAB station presets
1: You can recall preset stations by pressing the PRESET
button. Then use the TUNE UP (4) or DOWN (3)
buttons to select the desired preset. Once selected
press the SELECT button to activate.
NOTE: If you choose a preset that hasn’t been
allocated a station, then “Preset Empty” will be
displayed.
User instructions
To Next Page
Loading...
