25
Using your All-in-one System
Let’s get started
DRC (Dynamic Range Compression)
This function allows you to remove unavailable stations from the station list.
In “DAB” mode, press and hold the “Info/Menu” button, Rotate the dial until “DRC” is displayed
and the “Enter” button to confirm.
confirm your choice.
Preset stations
Programmed Station Function (preset station memory)
This function allows up to 99 radio stations to be programmed into the memory and stored in
the DAB and FM modes.
Storing DAB station as a preset station
Follow the instructions in the user manual of how to select a radio station.
Then press and hold the “Preset” button. “X (Empty)” is displayed if no previous station has been
stored in the preset memory.
Rotate the dial button to scroll through the “Preset” numbers, to choose where you would like to
store the radio stations. You can choose between preset memory no.: 1-99.
Press the “Enter” dial to store the radio station. The message “Preset XX saved” will appear in the
display.
Recalling DAB station presets
You could recall your station presets by pressing the “Preset” button, then rotate the dial button
to browse through your presets and press the “Enter” button to listen to the radio station that you
choose.
If you choose a preset that has not been allocated with a radio station, then the message “preset
empty” will be displayed.
DAB Display modes , Station information in DAB+ Mode
This function allows information related to the current radio station to be shown in the second
line of the display.
To Next Page
Loading...
