21
Using your All-in-one System
Let’s get started
Sleep:
actions have been performed up until then.
minutes” – “90 minutes” – “120 minutes” – “150 minutes” – “180 minutes”, then press the dial /
Enter to confirm.
Alarm Setting
Note: Check that the radio has the correct time and date before you set an alarm.
1. Press the “Alarm” button on the front of the radio, “Alarm 1” is displayed. Press the “Dial /Enter”
button.
2. Press the “Dial /Enter” repeatedly to switch “ON” or “OFF” the “Alarm 1”.
3.Choose the frequency of the “Alarm 1”, press the “Enter” button then rotate the dial to select:
“Daily” – “Once” –“Weekends” – “Weekdays”, press the “Enter” button to confirm and back
4. Set the wake up time: rotate the dial button to select “hour” and press the “Enter” button to
confirm. Then rotate the dial button to select “minutes” and press the “Enter” button to confirm.
5. Select alarm source: press the “Enter” button then rotate the dial select: “Buzzer” – “Digital Radio”
– “FM Radio”, press the “Enter” button to confirm and back
6. Select duration of alarm: press the “Enter” button then rotate the dial to select: “15” – “30” – “45”
– “60” – “90” – “120” minutes and press the “Enter” button to confirm and back
7. Select Volume and press the “Enter” button into Volume selection, rotate the dial to adjust alarm
volume to the level that you want, press the “Enter” button to confirm and back.
8. “Alarm 2”. To set “Alarm 2” please repeat steps 1-7 steps.
Note: The alarm volume will increase progressively until it reaches the alarm volume you have set.
Stop Alarm
When the alarm sounds, you can stop it immediately by pressing the Power/mode button.
When the alarm sounds, you can press any button (except for the “Power” button) to activate the
Snooze function. The default time for this function is 9 minutes.
Note: Simply press the “Power/Mode” button to stop the Snooze function.
To Next Page
Loading...
