Bush DC826B - Media Playback and Connectivity

CD operation
Press the MODE button on unit or remote control repeatedly to select CD mode. Playback
Playback
Using your "All-in-one System"
Let’s get started
1. Press the Eject button on unit or remote control to open the disc tray.
2. Place the CD with the label side up into the CD compartment, and then press the Eject
button on unit or remote control to close the disc tray. The CD will playback
automatically.
3. If there is no disc or the disc can’t be read, "No
disc" will show on the display.
4. This unit can play CD, CD-R, CD-RW disc.
To pause playback
1. Press SCAN/ play/pause on unit or play/pause button on remote control to pause the
playback.
2. To resume playback, Press SCAN/ play/pause on unit or play/pause button on remote
control again.
To stop playback
Press Stop/Enter dial button on unit or stop button on remote control to stop playback.
Skipping to another track
∞ Press the Previous / Next buttons on unit or remote control to skip backwards to the
beginning of the track or previous track or skip forwards to the next track.
∞ Press and hold the Previous / Next buttons on unit or remote control to perform fast
forward/reverse playback.
Alternatively, press number keys on remote control in sequence can skip to the target track
directly
Playing setting
1. During CD mode, press info / menu button to access CD menu.
2. Rotate the dial to choose Re
peat and press the Enter dial button.
dial button
28