27
Using your All-in-one System
Let’s get started
Audio setting
FM mode, long press the “info/menu” button and rotate the dial to choose Auto setting and press
“Enter” dial button to Auto setting.
Rotate the dial button to choose “Forced mono” or “Stereo allowed”. If the radio signal is weak,
please choose “Forced mono” to get better sound quality.
Preset stations
Programmed Station Function (preset station memory)
This function allows up to 99 radio stations to be programmed into the memory and stored in the
DAB and FM modes.
Storing FM station as a preset station
Follow the instructions in the user manual of how to select a radio station.
Then press and hold the “Preset” button. “X (Empty)” is displayed if no previous station has been
stored in the preset memory.
Rotate the dial button to scroll through the “Preset” numbers, to choose where you would like to
store the radio stations. You can choose between preset memory no.: 1-99.
Press the “Enter” dial to store the radio station. The message “Preset XX saved” will appear in the
display.
Recalling FM station presets
You could recall your station presets by pressing the “Preset” button, then rotate the dial button to
browse through your presets and press the “Enter” button to listen to the radio station that you
choose.
If you choose a preset that has not been allocated with a radio station, then the message “preset
empty” will be displayed.
FM display modes
This function allows information related to the current station to be shown in the display. Press
RDS (scrolling text): The broadcaster may include a scrolling text message about the current
program. (if RDS is available).
Program type: This describes the type of the program being broadcasted.
Audio Mode: the display will show if the radio station being received is with stereo or mono
sound
Time/date: the time and date will automatically be updated by the radio time signal (if RDS is
available).
To Next Page
Loading...
