USB operation
∞ The unit can only play MP3 file format in USB operation.
∞ This unit supports USB versions 1.1 and 2.0.
∞ The unit can support USB devices with up to 32GB of memory.
∞ The unit may not be compatible with all USB devices and memory cards, this is not an
indication of a problem with the unit.
Using your All-in-one System
Let’s get started
1. There is an USB socket located at the back of the unit. When a USB device is connected to the
unit, press the MODE button on the unit or remote control repeatedly to select USB mode.
2. The unit will automatically playback the tracks.
3.Use the “Previous” or “Next” button to play the previous or next song.
Note: The USB port does not support charging of any de
vice or data transfer from a computer.
AUX IN
1. There is an AUX IN socket located at the back of the unit. Analogue audio sound signals from
other audio sources can be input to the unit through this socket.
2. Connect the input to another audio device via an AUX cable (not included) with AUX IN socket.
3. Press the MODE button on unit or remote control repeatedly to select AUX IN mode.
4. Turn the VOLUME +/- dial on unit or press VOL+/- buttons
on the remote control to adjust the
volume control for your desired sound output level. In "AUX IN" mode, operate your connected
audio device directly for playback features.
∞ When connecting the external audio device, refer to the owner’s manual of the external
device.
∞ Examples of External Audio Device that can be connected to the unit are: Portable MP3
Players, Cassette Players, Mini Disc Players, DVD Players, etc.
Using earphones
Turn down the volume before connecting the earphones (3.5mm stereo min plug) to the
earphones socket.
Slowly raise the volume with the earphones on until you reach your desired volume.
When earphones are connected, the speakers automatically mute.
Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme
volume when using earphones, especially for extended period of time.
30
To Next Page
Loading...
