Bush DF1010 - Set time format; Auto power on;off; Reset setting

Using your Digital Picture Frame
Let’s get started
Using your Digital Picture Frame
20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Set time format
Select from 12 or 24 hour clock format. Press the PLAY/PAUSE button (6) to store the
settings.
Auto power on
Select a time for the picture frame from to automatically turn on. Set the status to ON to
activate the function.
Auto power o
Select a time for the picture frame from to automatically turn off. Set the status to ON to
activate the function.
Reset setting
Should you wish to restore the picture frame software to the default settings you can
select this option.
Use the navigation buttons to select YES from the options and press the PLAY/PAUSE
button (6) to perform the reset. Select EXIT should you wish to return back to the SETUP
list.
All settings will be lost after performing the reset function.