Bush Heritage 2 - DAB Station Organization; Station Order, Info, and Presets

24
Changing Station Order
You may want to display the stations in different order.
1. Press MENU button, turn SELECT/SNOOZE knob to select Station order, and then press
SELECT/SNOOZE knob to confirm.
2. Turn SELECT/SNOOZE knob to select 'Alphanumeric', 'Ensemble' or 'Valid', and then press
SELECT/SNOOZE knob to confirm your selecting option.
Alphanumeric
Display all stations in alphanumeric order.
Ensemble
List currently broadcasting active stations before inactive ones.
Valid
Remove inactive stations from the station list.
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button on the main unit
repeatedly to view information through DLS (Dynamic Label Segment), Ensemble, Program
Frequency, Signal Quality, Signal Strength, Bitrate, Codec, Channel and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show
on the display.
The indicator on the signal bar shows the
minimum acceptable signal level.
# Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB/DAB+ stations. This will enable you to access
your favourite stations quickly and easily.
1. While playing your favourite station, press and hold PRESET button on the main unit until
diaplay shows as below:
2. Turn SELECT/SNOOZE knob to cycle through the preset numbers 1-10.
3. Select one preset number and then press the SELECT/SNOOZE knob, display will show
‘Preset stored’.
4. Preset number ‘ ##’ will show on the display.