Bush MCS-512 - Next Track; Previous Track; Fast Forward;Fast Backward; Intro

11
Next track:
Press and release the button
on the Micro Hi-Fi or on the
remote control.
Previous track:
Press and release the button
on the Micro Hi-Fi or on the
remote control.
Fast forward/Fast backward
within a track:
Your Micro Hi-Fi has 5 dierent
speed options for Fast forward
or Fast Backward within a track.
These are 2x, 4x, 8x, 16x and 32x.
For each press and release of
the Fast Forward or Fast
Backward button on the
remote control, the speed will be
displayed. E.g. FF 2, 4, 8, 16, 32.
Press and release the button
again to play the track at normal
speed or press and release
or one more time when 32 is
displayed.
Intro feature
When the CD is playing, press
and release the ‘Intro’ button. on
the remote control. ‘INtr ON’ will
be displayed.
The rst 10 seconds of each track
will now be played.
Press and release the ‘Intro’
button again to turn this feature
o. ‘INtr OFF’ will be displayed.
Repeat
Press and release the ‘Repeat’
button on the remote control.
‘rEP ONE’ is displayed and the
current track will be repeated.
Press and release the ‘Repeat’
button again to repeat all of
the tracks on the CD. ‘rEP ALL’ is
displayed.
Continuously press and release
the ‘Repeat’ button on the
remote control to cycle through
the available options of Repeat
(current track), Repeat all (all the
tracks on the CD) or Repeat o.
Random
Press and release the ‘Random’
button on the remote control.
‘rAN ON’ will be displayed and
the tracks on the CD will be
played in a random order.
Press and release the ‘Random’
button again to turn this feature
o. ‘rAN OFF’ will be displayed.
Programmed play mode
In programmed play mode, you
can program the play order of
the tracks on your CD. You can
program up to 9 tracks in total.
Note: To set up programmed play
mode, the CD must be stopped
in the CD compartment and must
not be paused or playing.